PANEL INSTRUCTIONS
PREPARE THE WALL
Make sure the wall is clean, dry and not dusty. Don’t stick to delicate, poorly prepared or freshly painted walls. If in doubt, test in an inconspicuous area first.
ON THE WALL
Peel off the protective film, position Panel on wall and press firmly for a few seconds where the sticky tabs are.
OFF THE WALL
Lift the bottom edge away from the wall SLOWLY. Pulling off quickly may damage your wall.
THE TINYME 3 STEP GUIDE TO CREATING YOUR PANEL BY TINYME MASTERPIECE
BEFORE YOU START: Your Panels will stick to most clean, flat, painted or glass surfaces. For freshly painted walls allow a 3 week drying period.
Before applying you should make sure the surface is clean, dust-free and dry.
STEP 1. Place the little sticky dots provided onto the dotted circles on the back of your panel then peel back the protective covers.
STEP 2. Align your panel to the wall & press firmly for 30 seconds
STEP 3. Stand back and admire your masterpiece
REMOVING AND RE-USING YOUR PANELS: Using both hands, carefully lift your panel up from the bottom (like opening your car boot). Removing panels from your wall shouldn't damage or leave residue, but it is important to be careful while doing this in case the wall has been poorly prepared. Re-apply your panels by following steps 2 and 3.
Login and Registration Form